Bosch WGG2440ECO User Manual And Installation Instructions page 40

Table of Contents

Advertisement

en Troubleshooting
Fault
The appliance is not
working.
The programme does
not start.
The door cannot
be opened.
The water is not drain-
ing.
40
Cause and troubleshooting
Check the circuit breaker in the fuse box.
There has been a power cut.
Check whether the lighting in your kitchen or other
appliances are working.
You have not pressed Start/Nachlegen .
Press Start/Nachlegen .
Door is not closed.
Close the door.
1.
Press Start/Nachlegen to start the programme.
2.
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 32
Fertig in is activated.
Check whether Fertig in is activated.
→ "Buttons", Page 22
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start/Nachlegen to start the programme.
4.
The temperature is too high.
Wait until the temperature has dropped.
→ "Cancelling the programme", Page 31
Water level is too high.
Select a suitable programme for draining.
→ "Programmes", Page 24
Power failure.
Open the door using the emergency release.
→ "Emergency release", Page 46
Drain pipe or water outlet hose is blocked.
Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed.
Ensure that the drain pipe and water drain hose are
not kinked or trapped.
Drain pump is blocked.
→ "Cleaning the drain pump", Page 33
The water outlet hose is connected too high.
Install the water outlet hose at a maximum height of
1 metre.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents