Optoma DS305r Manual page 29

Security Settings
A. Press "Enter" to set password. (First time)
1. Password is allowed of 4~8 bits, Default value is "0000".
2. Display on the screen by "*" while inputting.
3. Use
"Enter" key to confirm your selection.
4. Move to and then press "Enter" key to confirm finally.
5. On this screen, press the "Menu" key will jump to
and then press "Enter" key to confirm your selection. ("Menu"
can be switched over between the position and
6. When input error to go to
the "Menu", and then press the
B. Press "Enter" to set the security protection.
Security Mode


On: Choose "On" to use security verification while user switch
on projector.

Off: When user switch on projector without password.

Timer: Displays the usable hours when switch on the projec-
tor. When the time remaining is 0, the time out message will
appear, and then press "Menu" or "Enter" to select input
password.
Timer Setting: When the Timer is selecting, this function can be

used.
Change Password: Press "Enter" to change password.

User Controls
keys to select your input bits, and then press
to delete the bit. (You can press
key.)
directly,
at present)
... English
29