Before Use - Hitachi CP-X955 Operating Manual

WARNING: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications, Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Instructions to Users:
This equipment complies with the requirements of FCC (Federal Communication Commission) Class A
equipments provided that following conditions are met.
(1) Video signal cables:
Double shielded coaxial cables (so called FCC shield cable) must be used and the outer shield must be
connected to the ground. Or, if normal coaxial cables are used, the cables must be enclosed in metal pipes
or similar way to reduce the interference noise radiation.
(2) Power cord:
Shielded power cord must be used. The outer shield must be connected to the ground.
(3) Video inputs:
The input signal amplitude must no exceed the specified level.

Before use

<Before Use>
Illustrated marks Various illustrated marks are used in this product and instruction manual so the product
is used correctly and safely, and also to protect you and others from danger and your
property from being damaged.
Warning
Caution
Examples of
illustrated
marks
This shows that a person could be killed or injured if the wrong operation
is done by ignoring this indication.
This shows that a person could be injured or material may be damaged if
the wrong operation is done by ignoring this indication.
The mark informs you that there is a warning (including caution).
The concrete details of the warning (the left diagram shows the caution for an
electric shock hazard) is shown in the diagram.
The mark informs you of a prohibited action. The concrete prohibited action
(the left diagram shows the prohibition of disassembly) is drawn in the diagram
or near it.
The mark informs you of actions you must do. The concrete instruction
details (the left diagram shows "Disconnect the power plug from the power
outlet") is drawn in the diagram.
3