Philips HX5352/46 Manual page 6

EngliSh
6
Preparing for use
Attaching the brush head
1 Align the front of the brush head with the front of the
toothbrush handle. Match the bars that are on the inside
top of the removable nut with the notches inside the top
of the handle and slide the brush head onto the handle.
2 Screw the brush head nut clockwise until it's firmly
tightened. If the brush head rattles when in use, tighten
the nut further.
3 Remove the travel cap from your brush head when you
are ready to brush.
4 Use the cord wrap in the bottom of the charger to store
excess cord.
Charging your Sonicare
Sonicare comes with the batteries completely discharged and
should be charged for at least 24 hours during the first few
days of use.
It is recommended that you keep your Sonicare in the charger
when not in use to maintain a full battery charge. It takes at
least 24 hours to fully charge the battery of your Sonicare
toothbrush.
1 To charge your Sonicare, place the handle in the charger
with the power button facing forward. Be sure the bottom
of the handle sits back securely in the charger, making
complete contact.