Philips HX5352/46 Manual page 10

Philips sonicare essence rechargeable sonic toothbrush hx5352
Table of Contents

Advertisement

EngliSh
10
4
To activate the Easy-start feature, press and hold the
power button for 5 seconds. You will hear 2 beeps to
indicate that the Easy-start feature has been activated.
Using the Easy-start feature beyond the initial ramp-up period
is not recommended and reduces the effectiveness of your
Sonicare toothbrush in removing plaque.
The Easy-start feature should be deactivated and the handle
fully charged when Sonicare is used in clinical trials.
Smartimer 2-minute timer
All Sonicare models come with the Smartimer feature,
,
which automatically sets the brushing time to the 2
minutes recommended by dental professionals.
After 2 minutes the Smartimer will automatically turn off
,
the toothbrush.
If you wish to pause or stop brushing during your
,
2-minute cycle, press the power button. Press the power
button again and the Smartimer will pick up where you
left off.
The Smartimer will automatically reset to the beginning of
,
a 2-minute cycle if:
-
brushing is paused for 30 seconds or longer;
-
the handle is returned to the charger base.
Quadpacer 30-second interval timer (available on
select models).
Quadpacer makes sure that you brush all sections of your
,
mouth evenly and thoroughly. At 30, 60 and 90 seconds,
you will hear a short beep and a pause in brushing action.
This is your signal to move to the next section of your
mouth.
Battery charge indicator (available on select models).
If your Sonicare has a low charge, you will hear 5 beeps
,
after you have brushed your teeth for 2 minutes and the
charge indicator light will flash rapidly.
When you hear the low charge indication, you have 3 or fewer
2-minute brushings left.
1
Place the handle in the charger base (with the power
button facing towards you) to begin the recharging
process.
The charge indicator light flashes slowly when the handle
,
is in the charger base to signal charging is in progress.
When the Sonicare is fully charged, the charge indicator
,
light is constantly on (not flashing), signaling that your
Sonicare is ready for use.
When not in use, keep your Sonicare in the charger base to
maintain a full battery charge.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents