Table of Contents
Advertisement
Note: When inserting the base
5.
panel, ensure that, if the base
panel is protruding or the cabinet
panel is flush-mounted, the time-
Light is not visible.
Install the base panel.
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run the Drain
gramme after you have emptied the
drain pump.
Turn on the tap.
1.
Insert the mains plug.
2.
Switch on the appliance.
3.
Pour 1 litre of water into compart-
4.
ment II.
Start the Drain
5.
Cleaning the water outlet
hose at the siphon
If the water outlet hose at the siphon
is dirty or the detergent solution is
not being pumped out, you must
clean these.
Switch off the appliance.
1.
Disconnect the appliance's mains
2.
plug from the power supply.
pro-
programme.
Cleaning and servicing en
Loosen the hose clamp and care-
3.
fully remove the water outlet hose.
Residual water may leak out.
Clean the water outlet hose and si-
4.
phon connecting piece.
Reattach the water outlet hose and
5.
secure the connection point using
the hose clamp.
51
Advertisement
Table of Contents
