Table of Contents
Advertisement
en Installation and connection
Unscrew the rear appliance feet.
7.
Align the appliance using a spirit
8.
level.
→ "Aligning the appliance",
Page 23
Installing the cabinet door
Note: Metal elements may impair the
function of the control panel.
Do not use any cabinet doors with
metal elements in the area of the
control panel.
18
Hold the cabinet door at the re-
1.
quired height on the appliance and
mark the upper edge of the appli-
ance on the inside of the door.
‒
Mark on the top edge of the appli-
ance at the left-hand stop
Mark on the top edge of the appli-
ance at the right-hand stop
Using the mark for the top edge of
2.
the appliance on the inside of the
door as a basis, mark the drill
holes as follows.
‒
Advertisement
Table of Contents
