Kenwood KMM-BT32U Instruction Manual page 15

Digital media receiver
Table of Contents

Advertisement

Available languages

Available languages

BLUETOOTH®
Make the settings for receiving a
call
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to make a
selection (see the following table), then
press the knob.
3
2
Repeat step
until the desired item is
selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
SETTINGS
AUTO ANSWER 1 — 30: The unit answers incoming
call automatically in the selected
time (in seconds). ; OFF: Cancels.
BATT/SIGNAL
AUTO: Shows the strength of the
battery and signal when the unit
detects a Bluetooth device and the
Bluetooth device is connected. ;
OFF: Cancels. Clock time is shown.
Make a call
You can make a call from the call history, phonebook, or dialing the number. Call by voice is also
possible if your mobile phone has the feature.
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to make a selection (see the following table), then press the knob.
Default: XX
3
Repeat step
2
the selected item.
4
Press and hold
To return to the previous setting item, press
CALL HISTORY
1 Press the volume knob to select a name or a phone number.
2 Press the volume knob to call.
PHONE BOOK
1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains many contacts).
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to call.
• If the phone supports PBAP, the phonebook of the connected phone is automatically transferred to the unit
• Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL
• This unit can display only non-accent letters. (Accent letters such as "Ú" is showns as "U".)
until the desired item is selected/activated or follow the instructions stated on
to exit.
• "INCOMING", "OUTGOING", or "MISSED" is shown on the lower part of the display to indicate the previous
call status.
• Press
to change the display category (NUMBER or NAME).
• "NO DATA" appears if there is no recorded call history.
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1
• To select the desired first letter, turn the volume knob or press S / T, then press the knob.
Select "1" to search with numbers and select "
when pairing.
.
), press J / K.
*
*
" to search with symbols.
13
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents