Table of Contents
Advertisement
Setting
Standby Mode
Indicators
Trigger Out
Inv Direction Button
Reset Operation Settings
Parent topic:
Adjusting the Menu Settings
Related references
Image Quality Settings - Image Menu
Options
Communication On
Communication Off
On
Off
Off
Power
Anamorphic Wide
On
Off
—
113
Description
Enable this setting to allow
monitoring and control of the
projector over a network when
the projector is in standby mode
Enables or disables the status
indicator lights on the projector
Outputs a DC 12V signal at 200
mA maximum from the Trigger
Out port whenever the projector
is turned on (if you select
Anamorphic Wide, voltage is
only output from the Trigger Out
port when the Aspect setting is
set to Anamorphic Wide or
Horiz.Squeeze)
Inverts the direction of the arrow
buttons on the control panel to
match the projector's installation
position
Reset all settings on the
Operation menu to their default
values
Advertisement
Table of Contents
