Advertisement
Contents
Connections
o Pass Through Source
Sets the HDMI connector that inputs HDMI signals when in standby.
Last:
CBL/SAT / DVD /
Blu-ray / Media Player /
Game / AUX / 8K /
TV Audio / CD
z
(Default : CBL/SAT):
z"Pass Through Source" can be set when any of the HDMI
connectors is assigned to "CD" for the input source in the "Input
Assign" setting. (v p. 179)
0 "Pass Through Source" can be set when "HDMI Control" is set to "On" or
"HDMI Pass Through" is set to "On". ("HDMI Pass Through" (v p. 166),
"HDMI Control" (v p. 168))
Front panel
Display
Playback
The most recently used input source will
go into standby mode.
Pass through the selected input source.
Rear panel
Settings
o RC Source Select
Set whether to allow this unit to be turned on by the input source select
button on the remote control when this unit is on standby.
Power On + Source
(Default):
Source Select Only:
0 "RC Source Select" can be set when "HDMI Control" is set to "On" or "HDMI
Pass Through" is set to "On". ("HDMI Pass Through" (v p. 166), "HDMI
Control" (v p. 168))
167
Remote
Tips
Appendix
The power of this unit is turned on and
the input source changes.
The HDMI input source changes while
this unit is on standby. The power display
of this unit blinks when the input source
select button of the remote control is
pressed.
Index
Advertisement
