Access Cam Services; Use Philips Easylink - Philips 19HFL3233D/10 User Manual

Access CAM services

1
Insert and activate the CAM (see 'Insert
and activate a CAM' on page 31).
2
OPTIONS.
Press
3
Select [Common interface].
» Applications provided by the digital
TV service operator are displayed.
Note
This menu option is available only if the CAM is
inserted and activated correctly.

Use Philips EasyLink

Get the most out of your HDMI-Consumer
Electronic Control (CEC) compliant device
with Philips EasyLink enhanced control
features. If your HDMI-CEC compliant devices
are connected through HDMI, you can control
them at the same time with your TV remote
control.
To enable Philips EasyLink, you need to:
through HDMI
device properly
Note
The EasyLink-compliant device must be switched on
and selected as the source.
Philips does not guarantee 100% interoperability
with all HDMI CEC devices.
EN
34
Switch on or off EasyLink
When you play an HDMI-CEC compliant
device, the TV switches on from standby, and
switches to the correct source.
Note
If you do not intend to use Philips EasyLink, switch
it off.
1
Press .
2
Select [Setup] > [TV settings] >
[EasyLink] > [EasyLink].
3
Select [On] or [Off], then press OK.
Set TV speakers to EasyLink mode
If you connect an HDMI-CEC compliant
device that includes speakers, you can choose
to hear the TV from those speakers instead of
the TV speakers.
When you play content from an EasyLink
compliant home theatre, if you want to
mute the TV speakers automatically, turn on
EasyLink mode.
1
Connect an HDMI-CEC compliant device
to the HDMI connector.
2
Connect an audio cable from the
SPDIF OUT connector to the EasyLink-
compliant device's AUDIO IN connector
(see 'Back connections' on page 30).
3
device properly (see the device user
manual).
4
Press .
5
Select [Setup] > [TV settings] >
[EasyLink] > [EasyLink].
6
Select [On], then press OK.
7
Select [TV speakers], then press OK.
8
Select one of the following, then press
OK.
[Off]: Switch off TV speakers.
[On]: Switch on TV speakers.