2
repeatedly to until [V -
Press
or
LAST] or [V - ADJ] is displayed.
3
Turn
to select a setting:
[V - LAST] : Each time you turn on
•
the unit, the volume remains from its
previous use.
[V - ADJ] : Each time you turn on
•
the unit, the volume is at the preset
level.
Store preset volume
You can turn on the unit at a preset volume.
1
Select [V - ADJ] as the start volume.
2
Press MENU/DISP for 3 seconds.
3
Press
or
repeatedly to until [A-VOL]
is displayed.
4
Turn
to select a value: 0 - 47.
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn off/on this beep sound.
1
Press MENU/DISP for3 seconds.
2
repeatedly to until [BEEP
Press
or
ON] or [BEEP OFF] is displayed.
3
Rotate
to select a setting:
•
[BEEP ON]: Turn on the beep
sound.
[BEEP OFF]: Turn off the beep
•
sound.
EN
20
CEM200_98_UM_V1.0_EN.indd
20
Turn display scroll on/off
For track information that is longer than the
display panel: you can select to cut off the
remainder of the text, or scroll to display the
full text.
Note
•
If any special characters are present in the
MP3 track name or album name, it may not
display correctly on the screen because these
characters are not supported.
•
Some WMA is protected by Digital Rights
Management (DRM), it cannot be played on
the unit.
•
Folders/files exceed the supported limit of the
unit are not displayed or played.
1
Press MENU/DISP for 3 seconds.
2
repeatedly to until [ROLL
Press
or
ON] or [ROLL OFF] is displayed.
3
Turn
to select a setting:
[ROLL ON] (scroll on): Auto scroll
•
during play.
[ROLL OFF] (scroll off): No auto
•
scroll display.
Select shock-protect setting
You can select the shock protection setting,
depending on the stability of your car and the
condition of the road.
1
Press MENU/DISP for 3 seconds.
2
repeatedly until [ESP] is
Press
or
displayed.
3
Turn
to select a setting:
[ESP 10 S]: select this when the road
•
is smooth and there are few bumps.
[ESP 40 S]: select this when the road
•
is bumpy and unstable.
11/11/2009
5:02:15 PM