Table of Contents
Advertisement
Other sound settings
You can also adjust the preset EQ / AUDIO
settings.
1
Press EQ / AUDIO for 3 seconds.
2
Press
or
repeatedly to select the item
to be adjusted:
• [BAS] (bass) range: -7 to +7.
• [TRE] (treble) range: -7 to +7.
• [BAL] (balance) range: 12L to 12R.
(L=left speaker, R=right speaker)
• [FAD] (fader) range: 12R to 12F.
(R=rear speaker, F=front speaker)
3
Rotate
to select a value.
7 Adjust system
settings
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn this beep sound on or off.
1
Press MENU.
2
repeatedly until [BEEP] is
Press
or
displayed.
3
Rotate
to select a setting:
• [BEEP ON]: turn the beep sound on.
• [BEEP OFF]: turn the beep sound off.
Turn demo mode on/off
1
Press MENU.
2
Press
or
repeatedly until [DEMO] is
displayed.
» The screen shows current demo mode
setting.
3
Rotate
to select a setting:
• [DEMO ON]: turn the demo mode
on. When the unit is idle for more than
120 seconds, all functions are displayed.
• [DEMO OFF]: turn the demo mode
off.
Dimmer
1
Press MENU.
2
Press
or
repeatedly until [DIMMER]
is displayed.
3
Rotate
to select a setting:
• [DIMM HIGH] (dimmer high)
• [DIMM LOW] (dimmer low)
EN
17
Advertisement
Table of Contents
