Table of Contents
Advertisement
Install the Philips Songbird software
again (after the first installation)
Important!
The Philips Songbird software installer is
preloaded to SPARK.
To free memory capacity for your media
content on SPARK, the installer file is
automatically deleted during the first
installation process.
If you want to install the software any time
after the first installation, follow these
instructions:
1
Connect SPARK to the computer.
2
Ensure that the computer is connected
to the Internet, and then open Windows
Explorer.
3
In Windows Explorer, right click on
SPARK, and then select the option to
install Philips Songbird.
The computer downloads the installer
»
file from the Internet.
4
Follow the on-screen instructions to
complete the installation.
Battery level indication
The display indicates the approximate levels of
the battery status as follows:
100%
75%
50%
»
A flashing battery screen indicates that
the battery is low. The player saves
all settings and switches off within 60
seconds.
Note
•
Rechargeable batteries have a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
•
The charging animation stops and the
icon is displayed when the charging process is
completed.
Tip
•
You can conserve battery power and increase
the play time of SPARK if you go to
[Display Settings] > [Screen off timer] and
ensure that the shortest timer setting is
selected.
Software loaded on the
SPARK
SPARK comes with the following software:
Philips Songbird (helps you update the
•
firmware of SPARK and transfer your
media files).
Files loaded on the SPARK
The following files are loaded on SPARK:
•
User Manual
•
Frequently Asked Questions
25%
0%
>
EN
9
Advertisement
Table of Contents
