Update Gogear Vibe - Philips SA1VBE08KA/02 Quick Start Manual

Update GoGear Vibe

Ensure that your computer is connected to the Internet.
1
2 Connect GoGear Vibe to the computer (see section
and charge for instructions).
3 On your computer, click
Audio Player > Vibe Device Manager to launch Philips
Device Manager.
4 Click Update.
> Philips GoGear Vibe Device Manager
and installs new firmware from the Internet, if available.
5 When the display shows
6 Disconnect GoGear Vibe from the computer.
> GoGear Vibe restarts after the firmware is updated and is ready
for use again.
Start > Programs > Philips Digital
Update completed, click OK.
Connect
checks for updates
17