Taking Out Of Operation At End Of Compressor Service Life - Atlas Copco LE2 Instruction Book

Instruction book

3.4 Taking out of operation at end of compressor service life

At the end of the service life of the compressor, proceed as follows:
1. Stop the compressor and close the air outlet valve(s).
2. Switch off the voltage and disconnect the compressor from the mains.
3. Depressurize the compressor.
4. Shut off and depressurize the part of the air net which is connected to the outlet valve. Disconnect the
compressor from the air net.
5. On LE/LT, drain the oil.
2920 1585 00 - 49 -