Table of Contents
Advertisement
Recording
Discs for recording
Several formats of DVD recordable discs
can be used with this DVD recorder:
DVD±RW (DVD ReWritable)
– Discs that are re-writable can be used
for multiple recordings once existing data
is erased.
DVD±R (DVD Recordable)
– Discs can only be used for a single
recording. Each new recording is always
added at the end of all previous
recordings as existing recordings cannot
be overwritten.
– Editing can be made on any DVD±R
discs as long as they have not been
finalized. It is also possible to create
additional chapter markers.
– To play a DVD±R on other DVD
player, it must be finalized (see page 34
"Playing your recordings (DVD±R) on
other DVD players"). After this is done,
no more data can be added to the disc.
DVD+R DL (DVD+R Double Layer)– Like
the DVD+R, these discs can only be used
for a single recording. The only
difference is the capacity- 8.5GB. It offers
two recordable layers on a single DVD
disc. The layers are accessible from the
TIPS:
Press to go back to previous menu item.
Press SYSTEM-SETUP to exit the menu.
6
same side of the disc, so recording can
occur completely uninterrupted.
IMPORTANT!
Unrecordable pictures
Television programs, films, video tapes,
discs, and other materials may be
copy-protected and therefore cannot be
recorded on this recorder.
Recording settings
The default recording settings allow you
to set the auto chapter markers,
preferred recording input source and
recording mode. Any changes made using
the remote control will only apply to the
current recording settings, the default
recording settings will remain for the
next recording.
Press SYSTEM-SETUP on the remote
A
control.
The system menu appears on the TV.
Use keys to select
B
{ System Setup - Record } and press
OK to confirm.
Use keys to select the setting you
C
wish to change and press OK to confirm.
Instructions and explanation of the
options are provided in the following
pages.
To exit, press SYSTEM-SETUP.
D
Advertisement
Chapters
Table of Contents
