Getting Started; Finding The Correct Viewing Channel; Switching To Different Play Source - Philips HTS3011/55 User Manual

Finding the correct viewing
channel
A
Press STANDBY-ON to turn on the
unit.
B
Press DISC on the remote control.
C
Turn on the TV and switch it to the
correct video-in channel.
You may go to the lowest channel on
your TV, then press the Channel Down
button on your TVs remote control until
you see the Video In channel.
You may press ° button repeatedly
on your TV's remote control.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO, etc..
Refer to your TVs user manual on
how to select the correct input on your
TV.
1_hts3011_55_eng 4_final807.indd19 19 1_hts3011_55_eng 4_final807.indd19 19

Getting Started

Switching to different play
source
On the main unit
Press the SOURCE button on the
unit repeatedly to select:
DISC FM AM/MW AUX 1
AUX 2 DISC ....
Or
On the remote control
Press AUX repeatedly to hear the audio
output from the external device.
'AUX 1' for device connected to
AUDIO IN-AUX 1 sockets.
'AUX 2' for device connected to
AUDIO IN-AUX 2 sockets.
Press RADIO to switch to FM or
AM/MW bandwave.
Press DISC to switch to DISC mode.
main
19
2008-02-13 10:14:41 AM 2008-02-13 10:14:41 AM