Manually Install Programs; Manual Installation - Philips 26PFL3403/10 User Manual

4.4

Manually install programs

Programs that were not stored during the initial
set-up can be installed manually. This might be
necessary if you are setting up cable network
programs.
Access the Manual installation menu
1. Press MENU and select Installation >

Manual installation.

Manually install programs
1. Select the Standard menu from the
Manual installation.
2. Press Í or Æ to select the standard for
your country.
Manual installation
Return
Standard
Reception
Frequency
Program search
Fine tuning
Store on number
Program name
Decoder
Teletext char.set
Choose your standard, then select reception.
3. Select Reception and press Í or Æ
to select the reception method for the
programs (antenna or cable network).
4. Select Program search and press Í or
Æ to select the reception program. When
a program has been found, the picture is
displayed. The frequency of the current
programs displays under the Frequency
option.
5. If the picture is not clear, adjust the setting.
Select Fine tuning and press Í or Æ to
adjust the tuning.
6. Select Program name and edit the name
as follows:
EN-14
UK...
Cable...
057.12 Mhz
CC02
02
CC02
1
• Press Í or Æ to select a character
space.
• Press Î and ï to select a letter, number
or symbol.
• Press Æ to go to the next character.
• Press OK to confirm.
7. If the program is encoded you can connect
a decoder to the EXT 1 socket. Select the
Decoder option and press OK, or press Í
or Æ to check the box.
8. Select the Teletext char. set option and
press Í or Æ to choose the character set
to use for Teletext on this program.
The following character sets are available:
• Western Europe
• Eastern Europe
• Greek
• Russian - Bulgarian
• Russian - Ukrainian
• Russian - Byelorussian
• Arabic
9. Select the Store on number option and
press the number keys to enter the number
assigned to the program (for instance, for
BBC1 type 01).
Press OK.
Note: Whenever you change a value in the
D
Manual installation menu, the Store on
number option starts flashing. To confirm
your change, select the Store on number
option and press OK. If you do not confirm
the change, it is cancelled when you change
programs or put the TV in standby.
10. Repeat the procedure to find other
programs.