Install Channels; Automatically Install Channels; Manually Install Channels - Philips 32PFL5206H/12 Manual

6 Install channels

The first time you set up your TV, you are
prompted to select a menu language and to
install TV and digital radio channels (if available).
Afterwards, you can re-install and fine tune
channels.

Automatically install channels

You can search and store channels automatically.
Step 1: Select your menu language
1
Press .
2
Select [Setup] > [TV settings] >
[Preferences] > [Menu language], then
press OK.
3
Select a language, then press OK.
Step 2: Select your country
Select the country where you are installing the
TV. The available channels for the country are
installed on the TV.
1
Press .
2
Select [Setup] > [Search for channels],
then press OK.
3
Select [Reinstall channels], then press OK.
» The country menu appears.
4
Select your country, then press OK.
The channel installation guide begins.
»
5
Select [Start], then press OK.
All available channels are stored.
»
6
To exit, press OK.
EN
26
Update the channel list
You can enable automatic update of channels
when your TV is in standby mode. The channels
stored in your TV are updated every morning
according to the channel information in the
broadcast.
1
Press .
2
Select [Setup] > [Channel settings] >
[Channel installation] > [Automatic
channel update].
3
Select [On] to enable the automatic
update or select [Off] to disable it.
4
To return, press

Manually install channels

This section describes how to search and store
analogue TV channels manually.
Step 1: Select your system
Note
•
Skip this step if your system settings are correct.
1
Press .
2
Select [Setup] > [Channel settings]
> [Channel installation] > [Analogue:
Manual antenna installation] > [System],
then press OK.
3
Select the correct system for your country
or region, then press OK.
Step 2: Search and store new TV
channels
1
Press .
2
Select [Setup] > [Channel settings]
> [Channel installation] > [Analogue:
Manual antenna installation] > [Find
channel], then press OK.
.