4
If you do not want to update the software,
select [Setup] > [Software settings] >
[Clear announcement], then press OK.
Note
•
If you skip the update, you can update it manually later
(see 'C: Check for updates through digital broadcasts'
on page 25).
C: Check for updates through digital
broadcasts
You can check if there are updates available
through digital broadcasts.
1
Press .
2
Select [Setup] > [Software settings] >
[Check on major updates].
3
If an update is available, follow the on-
screen instructions to start the update.
The TV restarts after the software
»
update is complete.
Change TV preferences
Use the preferences menu to customise your
TV settings.
1
Press .
2
Select [Setup] > [TV settings] >
[Preferences].
3
Select one of the following, then press OK.
[Menu language]: Select a menu
•
language.
[Sleep timer]: Switch the TV to
•
standby after a pre-defined duration.
[Location]: Optimise TV settings for
•
your location - home or shop.
[Volume bar]: Display the volume bar
•
when you adjust the volume.
•
[Auto switch off]: To conserve energy,
set the TV to switch off automatically
after a period of inactivity.
[Channel information size]: Change
•
the type of information that is
displayed when you switch channels.
[Audio out delay]: Automatically sync
•
the image on your TV to the audio
from a connected Home Theatre.
[Clock]: Display or remove the time
•
from the TV, and set clock options.
Start a TV demo
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
1
While you watch TV, press .
2
Select [Setup] > [Watch demo], OK.
3
Select a demo and press OK to view it.
4
To exit, press
.
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1
Press .
2
Select [Setup] > [TV settings] > [Factory
settings], then press OK.
3
If you are prompted to enter a code, enter
the child-lock code (see 'Set or change
code' on page 20).
A confirmation message is displayed.
»
4
Press OK to confirm.
EN
25