2-14. BELT
4 tray (AU)
2-15. OPTICAL PICK-UP BLOCK (KSM-213DCP)
Note 1: When disconnecting the wire (fl at type) (16 core) of optical pick-up block, solder the short-land.
belt
3 claw
2
5 optical pick-up block
(KSM-213DCP)
3 flexible flat cable (16 core)
(optical pick-up)
4 CD board
1 Remove four solders.
5 belt
3 claw
1 Slide the boss in the
direction of the arrow.
2 Solder the short-land.
Note 2: When assembling the optical pick-up block,
remove the solder of short-land after
connecting the wire (flat type) (16 core).
HCD-BX77DBi
11