Advertisement
Si071562E
3. Drain Pan
Warning
Step
1. Remove the bottom plate.
1
Remove the 11 screws.
2
Open the bottom plate
and slide it forward to
remove it.
2. Remove the drain pan.
1
Loosen the drain hose
screw and pull out the
drain hose.
2
Grip the drain socket
area with your right
hand.
3
Support the drain pan
with your both hands to
lower the pan and
remove it.
Removal Procedure
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
Bottom side
Bottom plate
Drain hose screw
Drain pan
(R22695)
(R22696)
Drain hose
(R22697)
Drain pan
(R22698)
socket
Drain Pan
Points
The number of screws varies
depending on the model.
Screws with ★ are flocking
screws.
If the drain hose is
embedded in the wall,
disconnect the drain hose
beforehand.
Be careful not to wet the
floor with remaining drain.
Place a plastic sheet under
the drain pan to prevent from
wetting the floor with
remaining drain.
There is no hook around
drain pan, be careful not to
drop it.
7
Advertisement
