Water Drainage - AEG Electrolux LAVAMAT 64819 User Information

4. Connect the hose to a tap with a
3/4" thread.
Always use the hose supplied with
the appliance.

Water Drainage

The appliance drain hose should hook into a standpipe, the hook in the
drain hose is formed using the plastic "U-Piece" supplied. The standpipe
should have an internal diameter of approximately 38 mm (see dia-
gram) thus ensuring there is an air break between the drain hose and
standpipe.
Important! It is essential to lay the drainage hose without kinks.
When discharging into a stand-
pipe ensure that the top of the
curve in the hose end is no more
than 90 cm (35.4'') and no less
than 60 cm (23.6'') above floor le-
vel.
35