Side Stirrer; Side Stirrer Motor - GE JVM2070 H Technical Service Manual

Side Stirrer Motor

The side stirrer motor is located on the left side of
the microwave oven.
Resistance through the side stirrer motor from
the power cord (L) to CN04 pin 5 is approximately
6.7 ohms. Isolated, the side stirrer motor is
approximately 7.0 ohms. The door (primary
interlock) must be closed to complete circuit.
Check motor circuit for 21 VAC when operating.
Removal
Remove the microwave (see
).
and Component Access
Disconnect the wire connector to the side stirrer
motor. Remove the screw and turn the motor
turn CCW.
Note: When installing stirrer motor, be sure the
locating pin is inserted in the motor mounting tab
and the side stirrer is resting on the support in the
cover prior to installing the screw.
Screw
Microwave Removal
1 /
8
Disconnect
– 10 –

Side Stirrer

Removal
Open the oven door. Pull the plastic rivet out of the
stirrer cover. Rotate the stirrer cover CCW until it
stops and remove the stirrer cover.
Remove the stirrer.
Stirrer
Note: When assembling, assure that the stirrer
rides on the support in the cover.
Rivet