Motorola RAZR Manual page 44

When your phone is connected to the network, the
Wi-Fi connected indicator
Tip: When you are in range and Wi-Fi power is on, you
will automatically reconnect to available networks you've
connected to before.
Wi-Fi modes
For those who like to get a bit more technical, your
phone supports the following Wi-Fi modes:
802.11 b, g, n.
Wi-Fi hotspot
You can make your phone a Wi-Fi hotspot to provide
portable, convenient internet access to other Wi-Fi
enabled devices.
Caution: This application significantly impacts battery
life. You may want to run this application with the
charger connected.
Note: You need to subscribe to Wi-Fi hotspot service to
use this feature. Contact your service provider.
To set up your phone as a Wi-Fi hotspot:
System settings
1 Touch Menu >
Mobile Hotspot Mobile Hotspot
>
hotspot.
Mobile Hotspot settings
2 Touch
Hotspot
to change hotspot security and configuration
settings:
42 Wireless
appears in the status bar.
Tethering &
>
to turn on the
Configure Mobile
>
Network SSID
• —Enter a unique name for your
hotspot and touch
Security
• —Select the type of security you want:
WEP WPA WPA2
, , or
Other users can access your Wi-Fi hotspot only if
they enter the correct password.
Note: Keep it secure. To protect your phone and
hotspot from unauthorized access, it is strongly
recommended that you set up hotspot
WPA2
( is the most secure), including password.
Broadcast Channel
•
minimizes potential interference. You may need
to try different channels after your hotspot is
active for a time.
Save
3 Touch when the settings are complete.
When your Wi-Fi hotspot is active, other Wi-Fi enabled
devices can connect by entering your hotspot's
Security
selecting a type, and entering the correct
Password
.
Next
.
. Enter a unique password.
Security
—Select a channel that
SSID
,