Optional I/O Modules (Ps2/Serial); Removing Optional Ps2 Module - Dell OptiPlex 7000 Small Form Factor Service Manual

Steps
1. Align the graphics card with the PCIe x16 card slot on the system board.
2. Using the alignment post on the PCIe slot, connect the card in the connector and press down firmly. Ensure that the card is
firmly seated.
3. Close the PCIe door.
Next steps
1. Install the side cover.
2. Follow the procedure in

Optional I/O modules (PS2/Serial)

Removing optional PS2 module

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
60 Removing and installing components
after working inside your
before working inside your
computer.
computer.