Removing Pedestal Stand - Toshiba 40SL412U Owner's Manual

7) VESA Mounting Pattern
TV Size Hole Pattern(HxV)
40" 200x200
46'' 400x400
55'' 400x400
Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a
flat, cushioned surface such as a quilt or blanket.
Leave the stand protruding over the edge of the
surface.
Note: Extreme care should always be used
when removing the pedestal stand to avoid
damage to the LCD panel.
2) Remove the four screws shown in the below
diagram. This will allow removal of the pedestal
stand.
3) Once you have removed all four screws holding
the pedestal stand in place, remove the pedestal
stand from the TV.
40" TV
Four screws
Four screws
6
Screw Size
mm M6
mm M8
mm M8
(unit in mm)
VESA Mounting Pattern
Hook
Sturdy strap
(as short as possible)
46" TV
Four screws
Four screws
55" TV
Four screws
Four screws
CAUTION: Always place the TV on the floor or a sturdy,
level, stable surface that can support the weight of
the unit. To secure the TV, use a sturdy strap from
the hook(s) on the rear of the TV to a wall stud, pillar,
or other immovable structure. Make sure the strap is
tight, secure, and parallel to the floor.
VESA Mounting Pattern
Hook
Sturdy strap
(as short as possible)
VESA Mounting Pattern
Hook
Sturdy strap
(as short as possible)