Connecting To Headphones; Viewing Pictures From Connected Video Equipment - Toshiba SD-P2600 Owner's Manual

Connections

Connecting to Headphones

You can listen to movies and music privately by
connecting headphones.
Headphones
(not supplied)

Viewing Pictures From Connected Video Equipment

You can use the LCD of this player to monitor pictures of video equipment connected via the AV IN jack.
Press the AV SOURCE button, then switch disc mode, card mode and external AV input mode. In the external AV
input mode, screen saver function/auto power OFF function becomes ineffective.
Note
When supplying non-standard signals such as playback images from a video deck or images from a game player, some
images may be displayed incorrectly.
80
To (headphone) jack
COMPONENT VIDEO
S VIDEO
BITSTREAM/PCM
AV IN
To AV IN
Audio/video cable
(supplied)
Caution
When you use headphones, keep the volume at a
moderate level. If you use the headphones continuously
with high volume sound, it may cause hearing damage.
Connecting headphones
Connect headphones to the headphone jack using
a stereo mini plug.
Before connecting, temporarily turn down the
volume with the headphone volume control.
Readjust to your preference when playback starts.
• Turn off the player before you connect or
disconnect the headphone cable. Possible shakes
produced by plug connecting/disconnecting may
cause damage to the disc.
• You can connect up to 2 headphones.
AV OUT DC IN 12V
To audio output (red)
To audio output (white)
To video output (yellow)
Signal flow
Video equipment