Changing Ultra Slim Bay Modules - Toshiba M750 User Manual

PORTÉGÉ M750
1:1 Mode Login screen
1. Turn on the computer.
2. The Select Tiles screen will be displayed.
3. Select Start face recognition (
4. The Select Account screen will be displayed.
5. Select the account, and click the arrow button.
6. "Please turn your face to the camera" will be displayed.
7. Verification will be performed. If the authentication is successful, the
image data taken in step 6 will be faded in and placed over one another.
8. Windows Welcome screen will be displayed, and will be logged in
automatically to Windows.

Changing Ultra Slim Bay modules

Ultra Slim Bay is a single-drive bay that accommodates either of the
following modules.
Ultra Slim Bay DVD Super Multi (Double Layer) Drive Kit II
Ultra Slim Bay HDD Adaptor II
Only use the Ultra Slim Bay modules that are provided with your computer.
Do not use any Ultra Slim Bay DVD Super Multi drive or HDD Adaptor from
other models including PORTEGE M700/M710, otherwise the computer
might be damaged.
This section explains how to change modules in the Ultra Slim Bay.
The illustrations show replacement of the Ultra Slim Bay DVD Super Multi
(Double Layer) Drive Kit II with the Ultra Slim Bay HDD Adaptor II.
To avoid injury, do not put your hand into the Ultra Slim Bay slot.
4-28
If an error occurs during authentication, you will be returned to the
Select Tiles screen.
If authentication was successful, but an authentication error
subsequently occurred during the login to Windows, you will be
asked to provide your account information.
).
User's Manual