Zte Warp 7 User Manual page 286

 Your phone is connected to the Wi-Fi network. You will see (
The password, for a household wireless LAN router, is sometimes found on a sticker on the

router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
Entering a password is not required if an access point is not security protected.

Advanced Wi-Fi Settings
The advanced Wi-Fi settings menu lets you set up and manage wireless access points.
Enable Notification when Open Networks Are Available: From Wi-Fi settings, tap Menu
●
Advanced and tap the Network notification slider.
The setting is available when Wi-Fi is turned on.

Tap Network notification to turn the option on or off.

Allow Some Services to Scan for Networks even when Wi-Fi is Off: From Wi-Fi settings, tap
●
Menu > Advanced and tap the Scanning always available slider.
Tap Scanning always available to turn the option on or off.

● Set Timing for Pausing a Connection: From Wi-Fi settings, tap Menu
Wi-Fi on during sleep and then select a setting.
Install Certificates for Secured Wi-Fi Networks: From Wi-Fi settings, tap Menu
●
Install certificates and then select the file to install.
● Use Wi-Fi Direct: From Wi-Fi settings, tap Menu
The setting is available when Wi-Fi is turned on.

For more information, see

● Use WPS to Connect to a Wi-Fi Network: From Wi-Fi settings, tap Menu
WPS Push Button or WPS Pin Entry.
The settings are available when Wi-Fi is turned on.

If you tap WPS Push Button, press the WPS button on the access point and the access

point will recognize your phone and add it to the network.
If you tap WPS Pin Entry, enter the PIN number displayed on the phone into the access

point's setup page. Your phone automatically finds the access point and configures the
connection.
Note: For detailed information about the WPS feature of the access point, please refer to its user
documents.
Settings
> Advanced > Wi-Fi Direct.
Wi-Fi Direct.
) in the status bar.
> Advanced > Keep
> Advanced >
> Advanced >
>
232