Cutter Unit; Peel-Off Unit - Toshiba B-SX600 SERIES Owner's Manual

14.3 Cutter Unit

Acceptable media thickness
Acceptable label pitch
Cut mode
Restrictions
∗ The Cutter Unit is a factory option.

14.4 Peel-off Unit

Effective print speed
Peeling method
Peeling detection system
Restrictions
∗ The Peel-off Unit is a factory option.
Item
Item
Specifications
0.08 mm to 0.26 mm
10 mm to 1,000 mm
Continuous cut
Cut after printing
Batch cut
• Cutting self-adhesive labels is not allowed.
• Cutting within 1 mm around perforation is not
allowed.
• Cutting fabrics or films is not allowed.
Specifications
101.6 mm/second or less (same as a feed speed)
Tensioning
A reflective photo sensor is used to detect a label.
Peel-off operation is not allowed when:
• Perforated labels are used
• Fanfold labels are used.
• Fabrics or films are used
• Outside wound labels are used
• Labels other than rectangular die-cut labels are
used.
14- 4
14. SPECIFICATIONS