1. There are two ways to turn on the radio. Press one of the Radio Preset Buttons to listen
to one of the preset stations, or press the H Music On/Off Button. The radio frequency
will appear on the display.
2. Set the AM or FM band by pushing the S Radio Band Button to AM or FM.
3. Press either the 4 Radio Tuner - or G Radio Tuner + Button to find the station.
Hold either button for a few seconds to scan the dial quickly.
Note:
•
Extend the wire antenna for better FM reception.
•
MP-3 Player may cause interference the radio reception. If interference occurs, turn off
and unplug MP-3 Player from the radio.
4. Press 6 Volume + Button or 5 Volume - Button to adjust volume level.
5. Press H Music On/Off Button to Off to shut off radio.
1. Connect your CD / MP-3 Player or other devices to the MP-3 / Aux Line-in Plug.
2. Press the N MP-3 / Aux Line-in Button. 'AU' will appear on the display.
3. Press 6 Volume + Button or 5 Volume - Button to adjust volume level.
Note: To avoid distortion of sound, always set the volume level of the auxiliary device to a
low or middle position, and adjust the desired volume level from the radio.
4. Press H Music On/Off Button to Off to shut off unit.
This alarm clock radio features an adjustable display backlight, with dim, medium, and
bright settings. To select a backlight setting, press the 1 Snooze / Dimmer Bar until
desired brightness is reached.
Playing the Radio
Playing the MP-3 / Aux Line-in
Adjusting the Display Backlight
6