Assembly and disassembly
5.5 DIN rail mounting
5.5
DIN rail mounting
5.5.1
Installation with the DIN rail mounting adapter
The DIN rail mounting adapter is not included with the product, see Accessories
(Page 22).
Mounting
1. Screw (M3 x 8, tightening torque 0.8 Nm) the DIN rail mounting adapter
rear of the device. The mounting material is supplied with the DIN rail mounting
adapter.
Figure 5-1
2. Place the device on the upper edge of the DIN rail
42
W7x8 with adapter plate
.
Operating Instructions, 03/2022, C79000-G8976-C617-03
onto the
SCALANCE WxM766