Checking Inputs/Outputs And Alarms - Mitsubishi Electric M800VS Series Connection And Set Up Manual

M800VS/M80V Series Connection and Setup Manual
21 Confirming the Basic Operation

21.1 Checking Inputs/Outputs and Alarms

21.1 Checking Inputs/Outputs and Alarms
 Checking the input signals
(1) Select [I/F dia] on the [Diagn] screen.
(2) Confirm that signals turn ON/OFF properly on the IF Diagnosis screen.
 Checking the alarm display
(1) Select [Alarm] on the [Diagn] screen.
(2) Check any other alarm than "Emergency stop EXIN" displayed on the Alarm screen.
IB-1501613-A 438