Troubleshooting - Danby DBMR02624WD43 Owner's Manual

TROUBLESHOOTING

PROBLEM
No power
Internal temperature not cold enough
Appliance runs continuously
Fan, light or LED display not working
Error code E1 or E2
POSSIBLE CAUSE
• A fuse may be blown or the circuit breaker tripped
• Plug not fully inserted into the wall outlet
• Temperature setting is too warm
• Door is not shut properly or opened excessively
• Recently added a large quantity of warm items to the
cabinet
• Close proximity to heat source or direct sunlight
• Ambient temperature or humidity is very high
• Air inlet or ventilation is blocked
• Temperature setting is too cold
• Door not shut properly or opened excessively
• Recently added a large quantity of warm items to the
cabinet
• Close proximity to heat source or direct sunlight
• Ambient temperature or humidity is very high
• This may require professional repair, please contact
consumer service
• Indicates an error in the temperature sensor, please
contact consumer service
6