Technics SC-EH580 Operating Instructions Manual page 15

1 Í
1
4
7
TEST
3D AI
CH SELECT
SUPER
SOUND EQ
VCR/AUX/
6CH INPUT
CD
∫
MUTING
4
5
1
PROGRAM
DISC
2
EH780
DISC
DISC
1 2 3
DISC
4 5
3
DISC
2 3
1
5 6 L/-/--
4
7 8 9 0
DISC
4
1
SLEEP PROGRAM CANCEL
CANCEL
2 3 DISC
2
5 6 IL/-/--
3
8 9 0
Î PRO LOGIC SUPER SRND
EQ
AV EFFECT
DIGITAL
S.WOOFER
TAPE/ TUNER/
CD
DECK 1/2 BAND
2/; ∫ 1 4
4 5
∂ VOLUME
j i
PRGM
PRGM
PRGM
Programmed
Programmed order
track no.
PRGM
Total playing time
PRGM
CDs
Program play
Select up to 24 tracks to play in the order you choose.
Remote control only
Preparation: Press [CD] to put the unit in CD mode.
1
Press [PROGRAM].
2
Press [DISC].
Within 10 seconds or so
Press [1]-[5] to select the disc.
3
Select the track with the numbered buttons.
For tracks numbered 10 and over, press [L/-/--] then the two digits.
e.g. To select track 21: [L/-/--]>[2]>[1]
Repeat steps 2 through 3 (SC-EH780) or step 3 (SC-EH680 and
SC-EH580) to program the tracks in the required order.
The total playing time of the programmed tracks is displayed.
4
Press [ ].
All the tracks are played in the selected order.
To cancel
Press [PROGRAM].
"CLEAR" is displayed and all the tracks are canceled.
"FULL" is displayed
If 24 tracks have been programmed.
"– –:– –" is displayed if;
total playing time for the tracks is over 99 minutes and 59 seconds.
a track numbered 25 or over was programmed.
a disc not in playing position was programmed (SC-EH780).
Tracks can still be programmed and played.
To check the contents of the program
Press [CANCEL]. "CANCEL" will light.
Press [4] or [5]. Each time you press the button, the
disc numbers (SC-EH780), track numbers and programmed order are
displayed.
After the playing time appears on the display, press [CANCEL].
"CANCEL" goes out.
To add to the end of the program
Repeat steps 2 and 3 (SC-EH780) or step 3 (SC-EH680 and SC-EH580).
To cancel tracks
1. Press [CANCEL].
2. Select the track with [4] or
A particular track
[5] then press [CANCEL].
3. Press [CANCEL] again.
All tracks Press [PROGRAM] or [ ] while stopped.
To program the track you are listening to
Press [PROGRAM]. The program mode engages and the current track is
automatically recorded as program No. 1.
15