Using Other Equipment - Technics SC-HD310 Operating Instructions Manual

■
v, u
DOLBY NR, REV MODE
SC-HD510
A
1 SC-HD510
INPUT SELECTOR
– DVD DIRECT
B
INPUT SELECTOR
– DVD DIRECT
C
●REC PAUSE
1
SC-HD310
INPUT SELECTOR,
1
–DVD DIRECT
SC-HD310
INPUT
SELECTOR

Using other equipment

Listening to an external source
A
1
Press [INPUT SELECTOR] to select
EXT/MD mode.
Each time you press [INPUT SELECTOR]:
TUNER
EXT/MD
On the remote control
Press [EXT/MD].
2
Operate the unit.
See the unit's manual for details on operation and connection
( a page 8).
B Enjoying sound from a DVD player
SC-HD510 only
Select the DVD mode to enjoy high quality from a DVD player
connected to the EXT/MD IN terminals.
Press and hold [INPUT SELECTOR
-DVD DIRECT] until "DVD" is displayed.
To cancel
Press [INPUT SELECTOR] to select another source.
Note
The DVD mode is designed specifically for use with DVD player.
The volume level will change if you select this mode while
equipment other than a DVD player is connected.
Recording an external source
q q Press [INPUT SELECTOR] to select EXT/MD
mode.
w w Select Dolby NR and reverse mode.
e e Press [● REC PAUSE].
r r Press [v v ] or [u u ] to start recording.
t t Start the source to be recorded.
See the unit's manual for details on operation and connection.
To stop recording
Press [■] on the deck.
Recording onto an external unit
Start recording on the external unit and start playing the source to
be recorded.
Using headphones (not included)
C
Reduce the volume before connection.
Avoid listening for prolonged periods of time to prevent hearing
damage.
Plug type: 3.5 mm stereo.
CD TAPE
,
25
RQT5296