Recording The Radio; Recording Cds Normal Recording - Technics SC-HD310 Operating Instructions Manual

A
2
REC PAUSE
3
B
2 2
3 3
REC PAUSE
4 4
20
RQT5296
2 3
■
■
A

Recording the radio

Preparation: Do the preparatory steps ( a page 19).
1
Tune to the required station.
( a page 12 or 13)
2
Press [● REC PAUSE].
The deck goes into the recording standby mode, [● REC
PAUSE] indicator lights and a play indicator starts flashing.
3
Press [v v ] or [u u ] to start recording.
u: to record on the forward side
v: to record on the reverse side
To stop recording
Press [■].
To temporarily stop recording
Press [● REC PAUSE].
The deck goes into recording standby mode.
Press the [v] or [u] button with the flashing indicator to resume
recording.
Recording CDs
Normal recording
B
Preparation: Do the preparatory steps ( a page 19).
1 1
Insert a CD.
( a page 16)
2 2
Press [v v ] or [u u ] then [■] to set the
tape direction.
u: to record on the forward side
v: to record on the reverse side
3 3
Press [● REC PAUSE].
The deck goes into the recording standby mode, [● REC
PAUSE] indicator lights and the play indicator starts flashing.
4 4
Press [u u ] on the CD player.
Recording starts automatically.
Four seconds after the CD finishes, the deck goes into the
recording standby mode.
To stop recording
EITHER
Press [■] on the CD player.
The deck goes into the recording standby mode four seconds later.
OR
Press [■] on the deck.
Recording stops immediately but the CD continues to play.
To record programmed tracks.
Program tracks after step 1 ( a step 1 and 2, page 18).