Table of Contents
Advertisement
Touch
Press the Settings
Next+
Linear
Best Dynamic Range for all sounds (Factory Default Setting).
Light (1-3)
For
are from Light 1, a slightly light touch, to Light 3, a very light touch.
Hard (1-3)
tings range from Hard 1, a slightly harder touch, to Hard 3, a very hard touch.
Piano Touch
Best for piano dynamics.
Easy Touch
Light touch, especially for younger players.
GM Receive
factory default of Linear.
Tune
Press the Settings
the Next+
Pressing Prev- / Next+
Press the Settings
Prev-
Pressing the Prev- / +Next
Bass
Press the Settings
Pressing the Prev- / +Next
Top Speaker Level
mum) and 1 (minimum). Pressing Prev- / +Next
MIDI Channel
reads CHANNEL: 1 (Factory Default). You can select Channels 1 through 9, or Channels 11 through 15. Channel 16
is reserved for the metronome. Pressing the Prev- / Next+
default of 1.
Settings, con't
playing technique.
Touch:Linear (factory default). To change the setting, press the
Prev-
Prev- / Next+
2A tuning to match other instruments or recordings.
TUNE:0 (factory default is A - 440). To increase the tuning, press
Treble:0. Press the +Next
Bass:0. Press the +Next
will reset the Top Speaker Level to factory default level.
Voice Mode. Press the Settings
Prev-
page 11
-
Prev-
-
Advertisement
Table of Contents
