Samsung SPHN200 User Manual page 9

1. Enter the number you want to save. Press <OK>. We suggest that you save numbers using ten
digits(area code + number) so you can dial from your phone book while traveling outside your
SPRINT Home Service Area.
2. The phone displays the available memory location. To save the number to a different memory
location, enter that location number and then press <OK>.
If you entered the number of a memory location that already a number stored in it, the phone prompts
"Replace?" Press <OK> to replace it with the new number or press <CLR> to go back a step.
3. Next, enter the name that goes with the number. To enter a letter, press the number key on
which it's listed once, twice or three times, depending on whether the letter you'd like to enter is
listed on the key first, second or third. (For example, < 2 > once for "A" Press < 2 > twice for
"B" and times for "C")
To enter letters consecutively that are listed on the same number key, press the # key to separate
them. For example, to spell Gill, you would do the do the following:
1. To enter "G," press < 4 > once.
2. To enter "I," first press # (since you will be pressing < 4 > again), then press < 4 > three
times to get "I,"
3. To enter "L" press < 5 > three times.
4. To enter the next "L," first pre press # (since you will be pressing < 5 > again), then press
< 5 > three times.
4. When the name is entered correctly, press <OK>. The phone displays a confirmation message
containing the name and number.
Entering a hard pause.
You can enter a hard pause in a number by pressing <MENU> while entering digits. The hard pause is
displayed as "p" on the phone. A hard pause is useful when you access an interactive voice response
system, such as an automated banking system.
Dialing from your phone book to a different area code.
When you're traveling outside your home service area, or when you're calling someone back from within
SPH-N200(DBDM) FCC Document
CONFIDENTIAL
May. 2, 2000