Samsung SPHN200 User Manual page 6

Responding to Call Waiting.
If you're in the middle of a call and you hear a beep, that means you have another call coming in. if
you don't answer the call within ten seconds, you will be reminded of the incoming call with second call,
press <TALK>.Press <TALK> again to switch back to the first call.
Re-dialing calls.
To re-dial the number of the last outgoing call made from your phone, press <TALK> <TALK>.To re-dial
any of your last ten outgoing calls, display the outgoing call log by pressing <TALK> use the arrow
keys to select the number and then press<TALK> again. The most recent call is displayed first. Another
option for re-dialing calls is to select a number from your incoming or outgoing call logs.
Setting Three-Way Calling
Three-Way Calling lets you SEND with two different people at the same time-Simply dial the first number
and press <TALK>. When you have connected, press <TALK> to put the first caller on hold. Next,
press <CLR>, dial the second number and press <TALK>. When you are connected, press <TALK>
again to begin your three-way call. Then you use this feature, you will be charged normal air time raise
for both calls that you place.
Saving or editing your own emergency numbers.
You can save up to three emergency phone numbers on your Samsung SPRINT Phone, in addition to
911. To save those numbers, follow the steps below.
1. Press <MENU>.
2. Press <8>, <4> to select "Security."
3. The phone prompts. "Lock Code." Enter your four-digit lock code (unless you've changed it, this
code is the last four digits of your Samsung SPRINT Phone Number). Once you've successfully
entered your lock code, the phone displays the security menu.
4. Press <3> to select "Special#." The phone displays your security numbers. (If no security numbers
have been saved, "Empty" is displayed in each slot.)
5. Select an emergency number slot by pressing the appropriate number.
6. Enter the ten-digit emergency number (area code+phone number) to be saved in that slot and
press < OK>.
7. The phone displays the number and "Saved" to confirm that the number was stored correctly. The
phone then redisplays the list of emergency numbers so you can make additional changes.
8. When you have finished storing numbers, press and hold <CLR> to exit and return to the standby
display.
SPH-N200(DBDM) FCC Document
CONFIDENTIAL
May. 2, 2000