Table of Contents
Advertisement
Connections
AC cord connection and fixing /
Cable fixing
Back of the unit
Insert the AC cord securely all the way seated on
the back side of the unit.
AC cord
(supplied)
Insert the plug until the line is hidden.
Class ll equipment
Note
●
When disconnecting the AC cord, be absolutely sure
to disconnect the AC cord plug at the socket outlet
first.
●
The supplied AC cord is for this unit exclusive use. Do
not use this for other purposes.
12
English
Cable fixing
Note
●
2 clampers are supplied with this unit. Fix the cables
at location as shown below.
If you need more clampers, purchase them from your
dealer. (Available from the customer service)
1 For signal cable: clamper
1. Attach the clamper
Note
●
Wipe off dirt, such as dust, water and oil on the
attachment surface, and affix the clamper on the
attachment surface by pushing it firmly.
●
Once the clamper is affixed, it cannot be reused. Be
sure to confirm the attaching position before affixing
it.
Remove the tape at the back, and affix the clamper on
the flat surface.
2. Bundle the cables
Pass the tip of the band to the hooks. Then pull and
hook it on the knob.
To loosen:
Remove the band from the knob, and pull out the band
tip.
1
Attachment
surface
hooks
knob
Advertisement
Table of Contents
