Table of Contents
Advertisement
Codec C90
Contents
Introduction
4
Add the system to the network
Your service provider should have provided you with the information you
need to get on-line.
For H323 type of communication, this will include such things as system
name, H323 alias, gatekeeper address, etc. For SIP type of communication,
similar type of information will be supplied.
For networks administrated through TMS (TANDBERG Management Suite),
your TMS administrator will be able to assist you when configuring.
The H323 and SIP settings are configured from the Administrator Settings
menu:
Navigate to Settings > Administrator Settings > Advanced Settings.
•
Expand the items in need of modification and enter the information
supplied by your service provider.
D14129.02—NOVEMBER 2008
Getting started
Getting started
About the menus
About the settings
Settings Library
5
Verify your settings
We strongly recommend that you verify the settings by inspecting the System
Information list.
You do this by accessing the System Information in the same way as you did
when you verified you IP address setting.
Go to System Information to verify the settings:
1.
Navigate to
Settings > System Information
2.
Verify the previous configurations. For example, if you successfully registered
to a SIP server the Status will show Registered. If the registration failed the
Status will show Not registered.
3.
Press Home (
) to exit.
6
Time zone settings
Verify the date and time to see if the time zone settings need to be adjusted. The
date and time is located in the upper right corner on screen.
Go to time zone settings to set the NTP (date and time) settings:
1.
Navigate to
Settings > Administrator Settings > Time > Zone
2.
You may need to consult the NTP Time Zone expression list to find the
right expression. Go to the
expression
to see a complete overview.
3.
Enter the time zone expression for where the system is located. The default
value is Etc/UTC.
NOTE:
Spelling correctly is important when entering the NTP Time Zone
expression
4.
Press
Save to save the changes, or Cancel to leave without saving.
5.
Press
Home (
Administrator Guide
Cameras
Appendices
Appendices
section and the
NTP Time Zone
) to exit.
Contact us
12
Advertisement
Table of Contents
