Lan Access; Device A Configuration - Genie W3500S User Manual

User Manual Point to Point / Multi-Point 3km IP Bridge

2.2 LAN Access

1.
2. Open your browser and input the login IP address of the device (if the device is A, enter

2.3 Device A Configuration

1.
2. Bridge mode is set to mode A
3. Set the ID number (the ID number of device A should be the same as device B)
4. After, select the [Application Settings] button and the configuration is complete.
7
After powering on the radio, connect LAN2 port to the PC network port and configure
IP address and subnet mask to 192.168.255.xxx
"http:/ /192.168.255.1", if the device is B, enter "http:/ /192.168.255.2") and press enter to
login to the WEB management interface.
Login to the interface of [Bridge Set]