Connecting Plasma Display To Audio System; Audio Signal Connection; Connecting The Power Cable - Sylvania 6842PE M Owner's Manual

EXTERNAL INPUT TERMINALS

CONNECTING PLASMA DISPLAY TO AUDIO SYSTEM

NOTE:
Cables shown here are not included with the plasma display.

AUDIO Signal Connection

(Example: Amplifier/Receiver)
AUDIO IN
VIDEO TV
Connect the AUDIO OUT from the plasma display to the AUDIO IN on the amplifier/receiver.
C
ONNECTING THE POWER CABLE
Connect the power cable to the plasma display after connecting the input terminals.
1
Connect the power cable to the plasma display
first.
2
Connect the power cable to an AC outlet.
20
AUX
L
R
2×RCA
audio cables
A C I N
1
AUDIO
Audio output
to L/R jacks
# CAUTION
• Do not connect the power cable to a power
supply outside the indicated voltage of the
plasma display (AC 120V). Connecting the
power cable to a power supply outside of this
range may result in fire or electrical shocks.
• Always use the power cable included with the
plasma display. Do not use any other cable.
For safety, make sure to always connect the
power cable to a three pronged AC outlet.
AUDIO OUT
L
R
2