DOK-SUPPL*-VAK*X0.1***-IT01-EN-P
Rexroth IndraControl VAK 10.1, VAK 40.1 Drawer Keyboard
8.2
CE Marking
8.2.1
Declaration of Conformity
The electronic products that are described in the present instructions, comply with the
requirements and the target of the following EU directive and with the following
harmonized European standards:
EMC directive 2004/108/EC
The electronic products described in the present instructions are intended for use in in‐
dustrial environments and comply with the following requirements:
Standard
Title
DIN EN
Electromagnetic Compatibility (EMC)
61000-6-4
Part: 6-4: Generic standards – Emission standard
(VDE 0839-6-4)
for industrial environments (IEC 61000-6-4:2006)
DIN EN
Electromagnetic Compatibility (EMC)
61000-6-2
Part: 6-2: Generic standards – Noise immunity for
(VDE 0839-6-2)
industrial environments (IEC 61000-6-2:2005)
Fig.8-2: Standards for electromagnetic compatibility (EMC)
Non-compliance with CE conformity due to modifications to the device.
The CE marking is only valid for the device in its delivery status. After hav‐
ing modified the device, the CE conformity is to be verified.
8.3
UL/CSA Certified
The devices are certified according to
● UL508 (Industrial Control Equipment) and
● C22.2 No. 142-M1987 (CSA)
UL File No. E210730
However, there can be combinations or extension stages with limited or missing certifi‐
cation. Thus, verify the registration according to the UL marking on the device.
Loss of UL/CSA conformity due to modifications to the device.
The UL and CSA marking is only valid for the device in its delivery status.
After modifying the device, the UL and CSA conformity is to be verified.
Bosch Rexroth AG
Standards
Edition
September
2007
March 2006
9/21