Dell Vostro 3267 Owner's Manual page 82

Option Description
Default setting: Not set
System Allows you to set, change, or delete the system password.
Password
Default setting: Not set
Internal HDD-0 Allows you to set, change, or delete the password on the system's internal hard-disk drive.
Password
Default Setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
Password Allows you to determine the minimum and maximum length of the Administrator and System passwords.
Configuration
Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD password,
when they are set. The options are:
● Disabled
● Reboot bypass
Default setting: Disabled
Password Allows you to enable the disable permission to the System and Hard Drive passwords when the admin
Change password is set.
Default setting: Allow Non-Admin Password Changes is selected.
UEFI Capsule This option controls whether the system allows the BIOS updates through UEFI capsule update packages.
Firmware Update This option is disabled by default.
Non-Admin Setup Allows you to determine whether changes to the setup options are allowed when an Administrator
Changes Password is set. If disabled the setup options are locked by the admin password.
TPM 2.0 Security Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
● TPM On (enabled by default)
● Clear
● PPI Bypass for Enabled Commands
● PPI Bypass for Disabled Commands
● Attestation Enable (enabled by default)
● Key Storage Enable (enabled by default)
● SHA-256 (enabled by default)
● Disabled
● Enabled (enabled by default)
● Optional hardware TPM 2.0
Computrace Allows you to activate or disable the optional Computrace software The options are:
● Deactivate
● Disable
● Activate
Default setting: Deactivate
CPU XD Support Allows you to enable the Execute Disable mode of the processor.
82 System Setup overview
NOTE: Successful password changes take effect immediately.
NOTE: Successful password changes take effect immediately.
NOTE: If Strong Password is enabled, the Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least 8 characters long.
NOTE: To upgrade or downgrade TPM1.2/2.0, download the TPM wrapper tool (software).
NOTE: The Activate and Disable options will permanently activate or disable the feature and no
further changes are allowed