Qvis QPIR-REC-IP65 Instructions

QPIR-REC-IP65
INFRAFED MOTION SENSOR
FOR LED PANELS
SPECIFICATIONS
Power Source
Power Frequency
Minimum Time Delay
Maximum Time Delay
Rated Load
Installation Height
Detection Range
Detection Distance
Ambient Light
Working Temperature
Working Humidity
Power Consumption
Detection Moving Speed
FUNCTIONS
• Identifies day & night. Working states can be adjusted to suit
different ambient light settings. The sensor can work in the
daytime and at night when it is adjusted to the 'sun' position
(maximum). The sensor can work in ambient light lower than
3LUX when it is adjusted to the '3' position (minimum)
INSTALLATION ADVICE
• Avoid pointing the detector towards objects with highly
reflective surfaces - mirrors etc.
• Avoid mounting the detector near heat sources, such as
ventilation, air conditioning units etc.
• Avoid pointing the detector towards objects than may move
in the wind and cause obstruction: curtains, tall plants etc.
220-240V/AC
50/60 Hz
10sec ± 3sec
15min ± 2min
600W to 1200W
2 - 2.4m
360°
8m Max (<24°C)
<3-2000LUX (adjustable)
-20~+40°C
<93%RH
Approximately 0.5W
0.6-1.5m/s