Samsung AM Series Installation Manual page 28

Setting an indoor unit address and installation option
Changing a particular option
You can change each digit of set option.
Option SEG1
Explanation PAGE
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
Indication and
Details
0
• When changing a digit of an indoor unit address setting option, set the SEG3 as 'A' .
• When changing a digit of indoor unit installation option, set the SEG3 as '2' .
NOTE
Ex) When setting the 'buzzer control' into disuse status.
Option
Explanation
Indication
• If you are using heat pump model, mixed operation mode (two or more indoor units operating in
different operation mode simultaneously) is not available when the indoor units are connected
CAUTION
to same outdoor unit. If you set the master indoor unit with a remote controller, outdoor unit will
operate in the mode which was set in the master indoor unit.
28
SEG2
The option mode
MODE
you want to change
Option
D
SEG1 SEG2 SEG3
The option mode you
PAGE MODE
want to change
0 D 2
SEG3 SEG4
The tens' digit of an
option SEG you will
change
Tens' digit
1~6
mode of SEG
SEG4
The tens' digit of an
option SEG you will
change
1
SEG5
The unit digit of an
option SEG you will
change
Unit digit
0~9 0~9 changed
of SEG
SEG5
The unit digit of an
option SEG you will Changed value
change
7
SEG6
Changed value
The
0~F
value
SEG6
1